Web Text-ures Logo
Web and Book design,
Copyright, Kellscraft Studio
1999-2016


(Return to Web Text-ures)
Click Here to return to
Mission Furniure 1
Content Page

 Return to the Previous Chapter
Kellscraft Studio Logo
(HOME)

HOW TO MAKE A PYROGRAPHER'S TABLE

Any pyrographer will appreciate the construction of the table and cabinet as illustrated. Anyone doing burnt wood work will know the annoyance of building up a steady support for the arm to the level of the article on which the work is to be done. The size of this table may be made to suit the surroundings and the space of the builder. Figure 1 shows the table with a slot cut in the side support in which to place the thumb screw of the bracket as shown on top of the table. It will be noticed, Fig. 2, that while both drawer and cabinet are available for storing the apparatus, they are not in the way of the operator while sitting at his work; the drawer overhangs the knees and the cabinet is far enough back not to interfere with sitting up close to the work. The bracket shelf slides in the slot at the side of the table, and is fastened to any height by the thumb screw There is also a smaller slide bracket on the shelf to clamp irregular objects to the side of the table. The thumb screws, hinges and drawer pulls can be purchased from any hardware store. When the table is not in use for pyrography it can be used for a writing table or a round top provided and attached on which to play games. When used for this purpose the bracket, as well as the pyrographic outfit, is stowed away in the cabinet as shown in Fig. 3.


 
Convenient Pyrographer's Table

 
Storage for Apparatus

Book Chapter Logo Click the book image to turn to the next Chapter.