Web Text-ures Logo
Web and Book design,
Copyright, Kellscraft Studio
1999-2016


(Return to Web Text-ures)
Click Here to return to
Mission Furniure 1
Content Page
Kellscraft Studio Logo
(HOME)

HOME-MADE MISSION CHAIR

Suitable for Dining Room Use

 A mission chair suitable for the dining room can be made from any one of the furniture woods to match the other articles of furniture. The materials can be secured from the planing mill dressed and sandpapered ready to cut the tenons and mortises. The material list can be made up from the dimensions given in the detail drawing. The front legs or posts, as well as the back ones, are made from 1 3/4 in. square stock, the back ones having a slope of 2 in. from the seat to the top. All the slats are made from 7/8 in. material and of such widths as are shown in the detail. The three upright slats in the back are 3/4 in. material. The detail drawing shows the side and back, the front being the same as the back from the seat down. All joints are mortised in the posts, as shown. The joints, however, can be made with dowels if desired. If making dowel joints they must be clamped very tight when glued and put together. The seat can be made from one piece of 7/8 in. material, fitted with notches around the posts. This is then upholstered with leather without using springs. Leather must be selected as to color to suit the kind of wood used in making the chair. The seat can also be made with an open center for a cane bottom by making a square of four pieces of 7/8 in. material about 4 in. wide. These pieces are fitted neatly to the proper size and dowelled firmly together. After the cane is put in the opening the cane is covered over and upholstered with leather in the same manner as with a solid bottom.




Book Chapter Logo Click the book image to turn to the next Chapter.